Faire fonctionner un scanner AGFA snapscan e20

1) install sane

sudo add-apt-repository ppa:rolfbensch/sane-git
sudo apt-get update
sudo apt-get upgrade

2) Ajout l'user au group

sudo adduser $USER saned

3) recup le pilote

wget https://wiki.ubuntuusers.de/_attachment/?target=Scanner%2FAgfa_SnapScan%2Fsnape20.bin

4) copie et droit du pilote

sudo mkdir -p /usr/share/sane/snapscan/
sudo cp snape20.bin /usr/share/sane/snapscan/
sudo chmod 777 /usr/share/sane/snapscan/snape20.bin

5) config ``/etc/sane.d/snapscan.conf``

firmware /usr/share/sane/snapscan/your-firmwarefile.bin
# Modifié par:
firmware /usr/share/sane/snapscan/snape20.bin

Et voila !!

liens:

https://wiki.ubuntuusers.de/Scanner/Agfa_SnapScan/